一、概述

DDZ型帶式輸送機用輪式抓捕器沿帶式輸送機多處安裝。當皮帶運行時，中間兩只底部托輥和左右兩側瞬發偏心托輥在皮帶帶動下同時隨皮帶自轉動，上閘塊調整到皮帶上方且與機架平行。當帶式輸送機發生斷帶或逆止器失效時，瞬發偏心托輥在下滑皮帶帶動下，以自身轉軸為中心做偏心轉動并觸發上閘塊動作，使上閘塊與偏心托輥間隙發生趨小改變，從而將下滑的皮帶夾持在上閘塊與瞬發托輥之間。

Summary

DDZ belt conveyor wheel-type belt capture devices are fixed aside by the conveyor. When the belt runs, two bottom rollers in the middle and the prompt eccentric rollers at both sides will self-rotate together with the belt, and the upper brake block will adjust to parallel with the frame and above the belt. When the belt broken, or the backstop out of work, drove by the gliding belt, the prompt eccentric rollers will rotate eccentrically then touch the upper brake block, so the distance between the block and roller will change then capture the broken belt between block and roller.

 

 

二、 技術參數與適用條件

1、適用膠帶寬度：650mm～800mm；

2、單側制動寬度（可調）：100mm～150mm；

3、額定制動力： 20KN；

4、最大破壞載荷：≥70kN；

5、制動距離：300mm～800mm；

6、上運傾角：≥6°。

Technical parameters

1. Applicable belt width: 650mm～800mm

2. One-side brake width(adjustable): 100mm～150mm

3. Rated brake force: 20KN；

4. Max. failure load: ≥70kN

5. Brake distance: 300mm～800mm；

6. Upward angle: ≥6°

三、性能特點

1、本抓捕器采用分體式結構、安裝方便、動作可靠；

2、無需外動力，利用皮帶斷帶后自身產生的下滑力作為制動力，將下滑的皮帶抓捕；

3、適用機架形式：固定式、拆卸式、吊掛式；

4、上閘塊可擺動年、可打開，上、下伸縮可調，制動間隙可調。

5、由于采取分體式結構，瞬發托輥槽角斜梁可作適度移動，調整托輥開檔。

Features:

1. Divided structure, easy to fix, high strength and reliable.

2. Without external force.

3. Applicable frame: fixed type, dismantling type or pendant type

4. The upper block can swing, open, adjust the expansion and brake distance.

5. The trough angle skew girder of prompt rollers can be adjusted. 

DDZ型輪式斷帶抓捕器（帶式輸送機用）實物圖：